# Manually Formatting EPUBs

I deDRM my ebooks. Yes, I admit it.

If you don't know what Digitally Right Management means, it is basically a way that companies encrypt electronic files so that people do not steal content or edit the files for malicious purposes. Which, in my opinion, is a valid reason.

I'm fine with reading a book on a proprietary device rather than printing it out. I'm fine with buying a the ebook with the same price (or a little more expensive) as the physical version. I'm even fine with a clunky user interface. If these were the only issues, I probably wouldn't spend the effort in removing the DRM.

But what ultimately drives me to remove the DRM encryption is the formatting. Yes, the formatting. There is an unacceptable amount of ebooks that have nonadjustable line spacing, bad character encoding (where it shows Â£ instead of £), or just plain bad design.

This is why I love the EPUB file format. Unlike Amazon's MOBI files, epub files are essentially just a zip file containing HTML and CSS designed specifically for ebook readers. That's it! All I have to do is change .epub to .zip, uncompress, fix the problem, compress the file again to zip, and then change the filetype back to .epub. Takes less than 5 minutes, tops.

So, last week, I got a gift card by one of my students for a major bookseller. I prefer to use my gift cards as soon as possible, so I decided to use it to buy an electric copy of one of my favorite books.

I should have looked at the ebook sample beforehand because the design was just terrible. Check it out:

For some of you (probably most of you), you are thinking, "What's the big deal? I don't see anything wrong with it."

The problem is the in-text citations!!!

They are supposed to be small, unobtrusive, and superscript. But what did I get? Large, underlined numbers. And to make the matters worse, the numbers are blue. Blue! Rather than hide in the background of the main text, the citations are shouting, "LOOK AT ME!"

Compare this to the physical copy of the book:

Much better. This is one of the main reasons why physical books (or even PDF ebooks) trump EPUBs and MOBIs. Typesetters take pride in their work.

After removing the encryption, I opened up the EPUB file and looked at the HTML source code. Luckily, all the in-text citations were labeled with an ID with an "a" like this:

<a href="../Text/19-Notes.html#d5" id="a5">1</a>

So I added the following lines of code to the CSS file:

[id^="a"] {vertical-align: super;
font-size: 50%;
line-height: normal;}
a {text-decoration: none;
color: #000000;}

As a result, I beautified the EPUB to look like this:

Voilà! Beautiful. It was like a breath of fresh air. Took you a while to see the citations right? That is how it is supposed to be.

# Bolted Down Handle of Paper Guillotine

"I've owned and used my HFS 12"" Heavy Duty Paper Guillotine for a little over a month now, and I have to say that I'm impressed. I was a little worried from the bad reviews—oil stains, slanted cuts, dull blades... but so far, I haven't had any problems.

It's all about tolerances. Whenever you get a piece of machinery, don't push it to its limits. If it can cut up to 400 pages, don't try to cut the 400 sheets of paper on it every day. It will eventually buckle and fail. Personally, I only use it to cut 150 pages at a time, max.

I love the paper cutter. It has a small toolbox where you store all your screw drivers and extra bolts, a smooth and even cutting action, and a solid, heavy frame with rubber feet. In short, it's awesome.

However, there has been one thing that fustrates me, and it fustrates a lot of reviewers too. Inside the vice handle, there is a small piece of plastic that holds the rubber grip in place, similar to a two-piece shaft collar. Sometimes, when I am too enthusiastic in unclamping my booklets, the rubber grip comes loose, and the two pieces of plastic fly everywhere.

Well, I finally lost one—Yes, bummer—but it was inevitable. I don't know why they designed the paper guillotine that way, but it seems like a temporary fix instead of a permanent solution.

As a result, I finally jumped the gun and bolted the handle down using a screw. I used the smallest drill bit I could find and drilled a hole in the metal bar, slowly increasing the drill bit until the hole was the right diameter. Even then, the metal bar was too tough for the screw's teeth to bite onto. But that's not something that a quick blow of a hammer can't fix.

Anyways, here is the final result:

It's not perfect—far from it—but the rubber grip rotates even more freely and is attached rock solid. If I were to do this gain, I would spend the time to tap-and-die the hole so the screw would fit like butter. I would have also put some silicon lube prior to reattaching the rubber handle.

Now, the paper guillotine works perfectly. Awesome.

# How to Make a Coffee Cup Booklet

However, the attractive convenience of disposable cups and bottles seems to always be an inhibiting factor when it comes to going packageless: if you buy just one cup of coffee or tea in a disposable cup every day, you’ll end up creating about 23 lbs of waste in one year. Packageless

Following the advice of another blogger, I decided to collect all of my garbage for a month to see how wasteful I was. After a month, I was surprised at how much non-recyclable and non-compostable items I bought. One area of improvement was reducing my use of disposable coffee cups. Since a large majority coffee cups are generally not recyclable or compostable, I had to throw them away in the garbage can.

Last week, I had a brilliant idea: I should make booklet covers out of them!

So I disassembled one of my coffee cups apart, and to my surprise, the large (Venti-sized) coffee cup had just enough paper to make a medium sized (3 1/2" x 5 1/2") notebook.

I looked around the internet to see if anyone else has thought of this but couldn't find a thing. So, I decided to make a tutorial about how to make a coffee cup booklet.

## Tools and Materials

Materials

• 20 oz Large Coffee Cup (Venti)
• Paper
• Staples

Basic Tools

• X-Acto knife
• Ruler
• Stapler
• Scissors

## Directions

The directions are fairly straight forward. However, one of the difficulties in this project is the process of dissassembling the paper coffee cup. Since they're designed to be watertight, the paper is lined with plastic and made with a thick stock paper making it difficult to tear apart without wrinkling or damaging the paper.

### Step 1: Peel Back the Paper Cup Lip

The lip of the paper is folded back to hold the lid in place, add structural stability at the top, and create a watertight seal at the top. The paper is rolled outward, so you have to unroll it so you can can cut along the seam in Step 2.

### Step 2: Cut along the Seam

Next, you need to cut along the seam of the cup. At first, I tried to rip the cup apart at the seam, but the cup was glued so tight that I often found myself ripping the sides of the cup making it useless. I just used some scissors to cut the seam from the top all the way to the bottom.

Afterwards, keep cutting straight until you cut the base of the cup in half.

### Step 3: Remove the base of the cup.

The bottom of the cup is useless, so you need to carefully remove it. Take care to pull slowly so the base peels away rather than ripping the sides of the paper cup.

### Optional: Step 3.5: Flatten out the sides of the cup

The paper cup naturally curves to take the shape of a paper cup. You can flatten it out by...

• curling it the opposite direction against the edge of a hard surface (like curling ribbons)
• ironing it out using an electric iron
• pressing it with a heavy object for several weeks.

However, this is not necessary in my opinion because as you put the booklet in your pocket, it will loosen up and conform to the shape of your fat thigh.

### Step 4: Cut the Outline of the Book Cover.

After the paper cup is dissassembled, you need to cut out the general shape of a booklet.

Leave extra margin space because you will need to cut the top, bottom, and foredge of the booklet. You also need to angle the template so that the image on the front cover is centered on the booklet. Also, if you center the front cover, the back cover will not be centered.

### Step 5: Cut and Fold all Pages of the Booklet

Get some paper, cut them to a manageable size, and and fold them in half.

### Step 6: Bind/Staple the Booklet Together.

Once you have all your pieces, you need to put everything together and staple bind them. If you don't have a saddle stapler, that's OK. You can staple them using a regular stapler and then fold afterwards. Another method is punch holes in all the pages and fold the staples in by hand.

If you want, you can sewn-bind them instead of stapling them.

### Step 6: Cut the Edges

Lastly, you need to cut the top, bottom, and fore-edge of the book. I used a paper guillotine to cut the paper, but you can use an X-Acto knife to cut the edges of the booklet.

### Step 7: Cut the Corners

Once you cut the top, bottom, and fore-edge, you need to cut the corners of the paper to help prevent folded corners. Also, it just looks aesthetically pleasing.

### Step 8: Use your Journal and Enjoy

You should celebrate! You are saving the enviroment and also have a nifty new notebook.

## Pictures of Coffee Cup Notebooks

Here is a few samples of my final product.

Here is a comparison of my notebook to a small Moleskin cahier.

## Thoughts and Reflections

There are two reasons why I like making these notebooks:

1. It's better for the enviroment - The general rule is that you should reduce, reuse, and then recycle. From now on, I'm going to buy a thermos so I buy less paper cups. However, since I already bought these paper cups, I might as well put them to good use by recycling them rather than throwing them away.
1. Waterproof Cover - Since the paper was originally designed to keep in water, it's reasonable to assume that it will help keep water out.

This tutorial is a small part of my larger project to make my own book business. If you want to see my current progress, you can take a look at my book design project page (which I update weekly.)

If you have any questions, comments, or suggestions for improvement, please comment below.

# Picks! Picks Everywhere!

My dryer has always had a consistent problem of never completely drying my laundry. It's an old dryer (probably 7 years plus), and it rattles more than a maraca. So I decided that it was time to do open it up and do so general maintenance.

It took me a while to figure out how to finally get it open, but afterwards, I wiped and vacuumed all of the dryer's nooks and crannies, especially the humidity sensor. I was curious to find out what was causing all the rattling. My guess was coins, but as I took off each wing in the drum (the part that juts out so that the clothes tumble inside the dryer), I just kept finding more and more picks.

Here is the booty from my adventure.

11¢, a handful of picks, and lint. I'm a rich man.

To show how much picks I found, here is all of my pics laid out in rows of ten.

49 picks in total.

And this penny is kind of cool.

I was not expecting to have such a fun time cleaning the dryer. Everytime I removed a wing, I was laughing like a maniac. Overall, it took 2 hours to clean out the dryer and reassemble it back together. However, knowing what I know now, if I were to do it again, I could probably clean everything in less than 30 minutes.

It's been a week since I cleaned out the dryer, and I still can't help but laugh at the situation.

To provide a bit of backstory, I just moved into this house, and so all of these picks must have been from old tenants. I am assuming the same person. I own a musician myself so I can empathize with this pick loser. I've lost track of how many times I've frustratedly muttered to myself, "What happened to all my picks?" I never answered my own question, but I definitely answered his.

The narrow gap between the wing and the drum must have been the perfect trap to collect free-roaming picks that the original owner neglectfully left in his jeans. Perhaps I will find a treasure trove of socks, chap-sticks, and hair ties when cleaning out the washing machine.

# Notebook Design: Version 1

I finished my first round of notebooks, and I've got to say that I'm impressed. It turned out better than I had hoped. I tend to be pessimistic about the future, so when the it actually becomes current, I'm consistently find myself pleasantly surprised. I should note that Version 1 will look different from subsequent versions because this first attempt was meant as more of a trial run rather than a sellable commodity.

In specific, the production of the Version 1 notebooks was meant to:

• Get rid of scrap paper.
• Trial run new equipment.
• Test run the production of a notebook.

I feel fairly confident in most of the equipment other than the printer, and I know for sure that I need to upgrade my corner puncher and buy a paper folder.

## Design and Discussion

Without further ado, here is a small sample of my Version 1 notebooks.

I used leftover pastel colored card stock from a previous project. There are four different colors: red, gray, green, and yellow. If I decide to use this color scheme in the future, I will probably sell them in a pack with one of each.

### Dotted Paper

For this first project, I decided to make only dotted notebooks because they are my favorite. However, when I make Version 2, I'll make lined, blank, and dotted notebooks. I don't plan on making grid notebooks because I think that the dotted notebooks are just as good and much more versatile for making tables and charts. I also intend to make isodot and hex dot notebooks as well (for all you organic chemists and DnD players out there.)

The grid spacing of the dotted paper was made with the default 5mm spacing. However, I decided to use light blue dots instead of black because I find the color unobstrusive and visually pleasing. In addition, these dots can be filtered out of a scanned paper (considering you don't use blue ink.)

### Rounded Corners

When cutting the corners, I had to be a little attentive especially when using a cheaper paper corner cutter. However, when looking at the corners up close, they seem to line up fairly consistently. Personally, I would not mind selling this specific notebook just the way it is. My biggest gripe—and its a huge one—is how long it takes to punch out the corners. With the current corner punch, I can only punch 5 pages at a time. It's time consuming, and slows my notebook making process almost to a grinding halt. I intend to upgrade my system soon.

I like how the notebook can be layed out flat, and there is clearly enough space to write in the inner margins. You can't do that with perfect bound notebooks.

Just like the paper corner cutter, I have to be careful when using the booklet stapler. However, once you get the hang of it, the results are very consistent as seen above.

## Further Thoughts and Reflections

Overall, I am very impressed with the final products of these notebooks. I was expecting it to look less professional, but it looks... actually sellable!

### Efficiency and Paper Waste

One thing that I've noticed about making these notebooks is how much paper waste there is. Using this method, I would waste at minimum 1/10 of all the paper I use.

$\eta_{b}=100-\frac{A_{u}-A_{c}}{A_{u}}*100$

$\eta_{b}=100-\frac{46.75\,in^{2}-(41.25\,in^{2}-0.017in^{2})}{46.75\,in^{2}}*100$

$\eta_{b} \approx 88.2\%$

Where $$\eta_{b}$$ is notebook efficiency, $$A_{u}$$ is the page area of an uncut notebook using US letter paper folded in half (8.50in X 5.50in), and $$A_{c}$$ is the page area of a popular cut A5 notebook (5.00in X 8.25in). The equation above includes the 2 rounded corners from the top and bottom of the page which would decrease the total area of the cut notebook ($$A_{c}$$) by $$0.017\,in^{2}$$.

Losing more than 10% of my material everytime I make a notebook is something I cannot ignore. It's a waste of resources which is bad economically and ecologically. Yet, I'm not sure if this problem can be fixed because I need to trim the top edge, bottom edge, and fore edge in order to make them flush. I've thought about making custom sizes, but I want the notebook to be compatible with existing notebook accessories out there.

### Equipment

In terms of equipment, I've had some minor problems getting consistent cuts.

#### Paper Guillotine

I've only had the paper guillotine for several weeks and was expecting to tune and calibrate the cutting machine, but it seems to cut tried and true straight out of the box. However, the markings on the platform are not precise, so I have to premeasure the cut line from now on. I'm not complaining. It does cut paper very well, and considering the price, I never expected this cutting edge technology to be... well... cutting edge technology. (My apologies for the corny joke.)

For my booklet stapler, anything over 20 pieces of paper would be too much—even 20 is pushing it. It's not like the stapler can't punch through more sheets, but rather, there is not enough bite for the inner papers to stay inside the booklet after normal use and abuse throughout it's lifetime. If I continue to use this stapler, I will need to reduce amount of paper to maybe 15 or so. I want pages of the notebook to be a nice rounded number, so I'm limited to how many pages are used.

#### Problems with Corner Punch

I got the corner punch on sale at a craft store when I went to buy twist locks an old leather briefcase I am restoring. The punch is mediocre at best. There is too much margin for error, so I have to be very very attentive to make sure that it cuts correctly.

#### Printer

I'm still trying to understand Tuvak, my Epson ET-2750 printer. I love the tank system that many Epson printers use (which saves on ink), but Epson printers (especially newer Epson printers) are still is not completely compatible with Linux systems. During this first major printing job, I encountered some technical software problems. Also, the dotted paper does not always line up correctly when folding.

### Paper Quality

Of course, the quality of the paper was pretty bad especially with juicier pens like fountain pens and rollerball pens. When using these types of pens, the paper feathers and ghosts very badly.

On the plus side, I don't use fountain pens or rollerball pens very often. I'm more of a gel pen, mechanical pencil, or ball point pen type of person. However, if I do plan to sell notebooks online in the nearby future, I need to try to find some type of paper that is somewhat fountain pen friendly.

### Last Thoughts

Now I have around 50 notebooks to fill up. I would say it will take around 8 months to finish. After I finish three notebooks, I will go onto the next stage of archiving them (by scanning) and begin to coptic bind them in preperation for Phase 2.

(By the way, I am thinking about possibly getting a Bookbinders Certificate License. I'll let you know if I actually follow through with it.)